Pneumatic Dust Valve CA45T
|Payment Type:||L/C,T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA,CPT,CIP|
|Min. Order:||2 Piece/Pieces|
|Delivery Time:||7 Days|
|Productivity:||100000pcs per month|
|Place of Origin:||Ningbo,China|
|Supply Ability:||100000pcs per month|
Model No.: CA45T
Pneumatic Dust Valve CA45T
The pulse control instrument is the main control device of the dust cleaning system of the pulse-type cloth bag dust remover. The output signal controls the pulse electromagnetic valve, which is used to circulate the compressed air to clean the dust of the filter bag. It is used to keep the resistance of the dust remover within the set range to ensure the processing capacity and dust absorption efficiency of the dust remover.
The duration of a continuous electrical signal output by the pulse injection controller, denoted by the pulse width. The time between the output signals is called the pulse interval. The time required for the controller to output an electrical signal to complete a cycle is called the pulse period.
Right angle Embedded Inline Plug Working-pressure 0.3~0.6MPa 0.2~0.6MPa 0.3~0.6MPa 0.2~0.6MPa Ambient Temperature -25~60℃ Customized for lower or higher temperature Relative Humidity ≤85% Working Medium Clean Air Voltage AC220V/DC24V/AC110V/AC24V Customized Protection Class IP65 Diaphragm Life Over One Million Cycles
The valve body and cover are die-cast compact and covered with clear paint to improve corrosion resistance.
The seal pad on the diaphragm is made of metal and rubber, which is rigid and does not leak.
Electromagnetic leader head suction, sensitive and reliable action.
One another:The same model, specifications of all other products, parts can be universal, interchangeable.
Stable and reliable performance, the service life of the diaphragm reaches more than 1 million times.
The diaphragm divides the electromagnetic pulse valve into the front and rear air Chambers. When the compressed air is connected, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure in the rear air chamber will press the diaphragm component tightly to the valve's output port, and the electromagnetic pulse valve will be in the state of "closed".
The electrical signal of the pulse injection control instrument makes the armature of the electromagnetic pulse valve move backward, the air chamber after the valve opens, the air chamber quickly loses pressure, the diaphragm component moves backward, the compressed air is sprayed through the valve outlet, and the electromagnetic pulse valve is in the "open" state.
The electromagnetic pulse valve armature is reset when the electrical signal of the pulsed injection control instrument disappears. The vent hole of the rear air chamber is closed. The pressure of the rear air chamber increases, making the diaphragm assembly close to the valve's output port.
NINGBO BRANDO HARDWARE CO.,LTD
BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.
BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.
BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.
Quick review of BRANDO products:
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products